Power
Requirement: |
- 115 Volt 1 Phase 60 Hz 15 Amp Dedicated Service
|
Maximum
Load
Size: |
- 60"W X 60"L X 84" High
- Maximum Load Diagonal of 85"
|
Maximum
Load
Weight: |
4,000 lbs. Dynamic/10,000 lbs.Static |
| Turntable: |
- 48" Octagonal 5/16" Thick Formed Steel Plate
- 4-point Caster Support System
- Turntable Height 11" from floor
|
Turntable
Drive: |
- 3 to 15 RPM Rotational Speed
- 1/2 H.P. DC Variable Speed Drive Motor
- Electronic Soft-Start Acceleration
- ANSI #50 Direct Chain Drive c/w Chain Tensioner
|
Carriage
Elevator: |
- 1/2 H.P. DC Variable Speed Motor
- ANSI #40 Direct Chain Drive c/w Shock Dampener
- 12 point carriage guidance system
|
Film Delivery
System: |
- Saf-T Thread Pre-Stretch Film Carriage
- 1/2 H.P. DC Variable Speed Motor
- Fully Electronic Dynamic Dancer Corner Compensation
- 40 to 313% Fixed Stretch Capability
- Pre-Stretch Ratio Variable by easy sprocket change
- Saf-T Thread Safety Door
|
Film
Capacity: |
- All commercial stretch films wound on 3" diameter cores x
20" width. Accommodates damaged cores.
|
Control
Features: |
- Simple to Operate
- Reliable Relay Logic Control Circuit
- Single Button Auto Cycle Start
- Emergency Stop Button
- Turntable Jog Switch
- Film Carriage Up/Down Switch
- Film Tension Control
- Variable Film Carriage Speed / Carriage Pause Control
- Variable Turntable Speed Control
- Auto Load Height Detection Photo-Eye
- Separate Top and Bottom Wrap Counters
- Up Only Wrap Mode Selector
- Positive Pallet Alignment
|
Other
Features: |
- Film Roping Bar
- All structural steel construction
- Estimated shipping weight 1,250 lbs.
|
| Warranty: |
- 3 Year Total Parts Warranty
|
| Options: |
- Base Extension
- Tower Extension
- 71" Diameter Turntables
- Dual Turntables
- Ring Gear Turntable Support / Drive System
|
