Power
Requirement: |
- 115 Volt 1 Phase 60 Hz 20 Amp Dedicated Service
|
Maximum
Load
Size: |
- 60"W X 60"L X 91" High
- Maximum Load Diagonal of 85"
|
Maximum
Load
Weight: |
- 5,000 lbs. Dynamic/18,000 lbs.
Static
|
| Turntable: |
- 69.5" Diameter 3/8" Thick Laser-cut Steel Plate
- 12-point Cam-Follower Support System
- Reservoirs for Self-Lubricating Turntable
- Turntable Height 3 1/4" from floor
- Safety Surround Deck encloses Turntable
|
Turntable
Drive: |
- 3 to 16 RPM Rotational Speed
- 3/4 H.P. DC Variable Speed Drive Motor
- Electronic Soft-Start Acceleration
- Final Revolution Deceleration and
Re-alignment
- ANSI #60 Direct Chain Drive c/w Chain Tensioner
|
Carriage
Elevator: |
- 1/2 H.P. DC Variable Speed Motor
- ANSI #40 Direct Chain Drive c/w Shock Dampener
- 12 point Maintenance-Free
Carriage Guidance System
|
Film Delivery
System: |
- Saf-T Thread Pre-Stretch Film Carriage
- 1/2 H.P. DC Variable Speed Motor
- Fully Electronic Dynamic Dancer Corner Compensation
- 33 to 313% Fixed Stretch Capability
- Pre-Stretch Ratio Variable by easy
Sprocket Change
- Saf-T Thread Safety Door
|
Film
Capacity: |
- All Commercial Stretch films wound on 3" diameter cores x
20" width. Accommodates damaged cores.
|
Control
Features: |
- Omron CPM1A Programmable Logic
Controller (PLC)
- Power Off-On-Start Switch &
Power On Light
- Auto Wrap Cycle Start/Pause
Push-Button
- Emergency Stop Push-Button
- Turntable Jog/Reinforce Wrap
(Elevator Pause) Push-Button
- Film Carriage Elevator
Lower/Raise Switch
- Wrap Program A-Man.-B Switch
for storage of three wrap patterns
- Film Tension (Force to Load)
Control
- Separate Film Carriage Elevator
Raise & Lower Speed Controls
- Variable Turntable Speed
Control
- Separate Top & Bottom Wrap
Counters (0-9)
- Up/Down - Up Only Wrap Mode
Selector
- Auto Load Height Detection
Photo-Eye
- Turntable Home Position
Positive Alignment
- Carriage Elevator Dynamic
Braking System
- NEMA 12 Control Enclosure
- Non-Proprietary UL/CSA Approved
Components
|
Other
Features: |
- 72" Wide x 65" Long
Heavy Duty ramp included for pallet jack loading
- All structural steel construction
c/w front and rear fork-lift pick-up channels
- Estimated shipping weight 1,800 lbs.
|
| Warranty: |
- 3 Year Total Parts Warranty
|
| Options: |
- Base Extension
- Tower Extension
- Additional Ramp
|
